Security Remote-Controlled Hydraulic Bollards For Anti Ram Protection

Installing automatic rising bollards involves several key steps, which typically require electrical, mechanical, and sometimes hydraulic expertise. Below is a general guide to the installation process for automatic rising bollards:

1. Site Assessment & Preparation:

• Survey the Area: Ensure the ground is level, and the bollard location is clear of underground utilities like gas, water, and electrical lines.
• Mark the Area: Mark where the bollard(s) will be installed.
• Obtain Permits: Check with local authorities to ensure compliance with zoning and safety regulations.

2. Digging the Foundation:

• Excavation: Dig a hole that meets the manufacturer’s specifications (typically between 1.0 to 1.5 meters deep and about 0.5 to 1 meter wide, depending on the model). The hole should allow for both the bollard cylinder and its mechanism.
• Install Drainage: Depending on your location, drainage might be necessary to prevent water buildup around the bollard. Install gravel or a drain pipe to facilitate water flow.

3. Electrical & Control System Setup:

• Run Electrical Cables: Lay underground conduit and wiring from the control box or power source to the bollard location. Make sure the electrical connections follow the manufacturer's instructions for voltage and load requirements.
• Install Control Box: Position the control box in a safe, accessible location. This box will typically house the automation system, sensors, and manual override options.

4. Installing the Bollard:

• Place the Bollard in the Foundation: Carefully lower the bollard into the hole, ensuring it's level and properly aligned with the surface.
• Connect Power & Controls: Attach the bollard mechanism to the electrical wiring and control system, following the manufacturer’s wiring diagrams.
• Hydraulic Installation (if applicable): For hydraulic models, connect the hydraulic lines to the bollard.

5. Pour Concrete & Secure Bollard:

• Fill with Concrete: Once the bollard is correctly positioned, pour concrete around it, making sure not to cover any moving parts or electrical components.
• Allow to Set: Let the concrete cure according to the manufacturer’s instructions (typically 24-48 hours).

6. Testing & Calibration:

• Initial Power-Up: After the concrete has set, power on the bollard system and test its movement (raising and lowering). Verify that the bollard moves smoothly.
• Adjust Settings: Calibrate sensors and timers according to the needs of the site (e.g., automatic lowering after a certain period or integration with access control systems).
• Emergency Features: Ensure that emergency override systems (manual lowering or raising) are operational.

7. Final Checks:

• Inspection: Ensure that all electrical connections are properly sealed, and there are no loose or exposed wires.
• Security & Safety: Install any required warning lights, alarms, or signage to alert pedestrians and drivers when the bollards are raised or lowering.

8. Maintenance Plan:

• Create Maintenance Schedule: Plan for regular inspections and servicing, especially of hydraulic systems, sensors, and control mechanisms, to ensure long-term reliability.

Specification

What is Hostile Vehicle Mitigation Barriers?

Hostile Vehicle Mitigation (HVM) barrier is a physical security device designed to prevent or mitigate the impact of deliberate vehicle attacks, such as ramming attacks or unauthorized vehicle access to secured areas. These barriers are engineered to stop vehicles from breaching perimeters by either halting or slowing them down. HVM barriers are used to protect high-risk sites, public spaces, critical infrastructure, and events from vehicle-borne threats.

Why Choose Us?

ZASP is the professional manufacturer of HVM barriers and we are the ONLY Chinese supplier who passed the impact test in UK by MIRA.

We supply K4/K12 standard products, such as Shallow Mount Road Blocker, Fixed Bollards, Automatic Bollards, Removable Bollards, Rising Beam Gate, also we provide the semi-automatic bollards, manual bollards, tyre killers, modular vehicle barriers etc.

Anti-Ram Hydraulic Bollards

Remote-Controlled Hydraulic Bollards

Anti Ram hydraulic security bollards

Security Remote-Controlled Hydraulic Bollards For Anti Ram Protection Images